| 除臭设备结构 |
| 添加时间：2019/11/8 15:37:46 浏览次数： |
| 除臭设备结构 Structure of deodorizing equipment 除臭设备由圆形塔体，用法兰分段联接而成。具体结构由进风段、压力室、鼓泡贮液箱、两级喷淋段、旋流板、出风锥帽等组成。其特点是：制作方便、便于按装检修、强度高、占地面积小。废气由风机压入净化塔的内筒形成压力室，再由压力室均配给每根鼓泡管，废气通过鼓泡进入贮液箱的吸收中和液中产生鼓泡，使气液充分接触，提高净化效率。然后进入喷淋层，喷淋形式采用双层填料，两级喷淋，使气液充分接触，提高净化效率。本塔配用一台玻璃钢离心通风机和塑料水泵或不锈钢水泵即可。当处理风量在10000立方米以上时，采用二台水泵就能达到设计要求。 The deodorization equipment is made up of a circular tower body connected by flanges in segments. The concrete structure consists of an air inlet section, a pressure chamber, a bubbling tank, a two-stage spray section, a swirl plate and an air outlet cone cap. Its characteristics are: easy to make, easy to install and repair, high strength, small area. The exhaust gas is pushed into the inner cylinder of the purification tower by a fan to form a pressure chamber, and then each bubbling tube is allocated by the pressure chamber. The exhaust gas enters the absorption neutralizing liquid of the storage tank through bubbling to produce bubbling, which makes the gas-liquid fully contact and improves the purification efficiency. Then it enters the spraying layer. The spraying form adopts double-layer filler and two-stage spraying, which makes the gas and liquid fully contact and improves the purification efficiency. The tower is equipped with a FRP centrifugal fan and plastic water pump or stainless steel water pump. When the air handling capacity is over 1000 cubic meters, two pumps can meet the design requirements. |
| 上一页 天然植物除臭剂 |
| 下一页 除臭设备其特点是 |